Properties:
- Chloride free
- Highly reactive rapid setting cement
- Immediately starts to set upon addition of water
- For interior and exterior use
Key Features and Benefits:
- Easy fo use and to apply
- Environmentally friendly
- UV-stable
- Resists hydrostatic pressure (> 5 bars}
- Crack bridging ability
- Flexible Enables substrates to breathe
- Can be applied to damp surfaces
- Abrasion resistant
- Selt-curing
- Active barrier to Carbon Dioxide (CO9}
- Stands up to pedestrian and light traffic
Product Storage:
dry, 12 months in the original unopened packaging. Use opened packaging promptly.
Technical Specifications:
- Basis: cement, additives
- Colour: cement grey
- Bulk density: approx. 1.2 kg/dm3
- Substrate/application temperature: +5° C to +30° C
- Start of setting: immediately after water addition
- Consumption: approx. 2 kg per litre of void
- Packaging: 6 and 12 kg plastic buckets
Product Application:
Plugging of leaks can be achieved by pressing FIX 10-S, in the dry form, into the leaking area by hand. If the leaking area is not sealed by the first plugging attempt, FIX 10-S can be applied again followed by several coats of AQUAFIN-F, which is then included within the surface applied waterproof membrane selected.
Substrate preparation
The substrate must be sound, load-bearing, clean and free from adhesion inhibiting materials. Remove loose render and masonry sections. To improve the anchoring of FIX 10-S, chop out the leaking area, as necessary, to form a swallow tail before plugging.
Plugging of Leaks
Plugging of leaks can be achieved by pressing FIX 10-S, in the dry form, into the leaking area by hand. If the leaking area is not sealed by the first plugging attempt, FIX 10-S can be applied again followed by several coats of AQUAFIN-F, which is then included within the surface applied waterproof membrane selected.